How to have clean water at home

We have an urgent need for access to clean water in every home. While higher authorities might be doing their best to provide us with clean and secure drinking water, we too have a responsibility. We need to ensure that our homes and workplaces have a pure, trusted and clean water.

In an emergency situation where regular water utility is interrupted – like a hurricane, flood, or water pipe breakage – local authorities recommend using bottled water, boiled water, or disinfected water until regular water service is restored. However, boiling or disinfection will not destroy contaminants, such as heavy metals, salts, and other chemicals.

Most people faith an RO Filter or an RO UV Water PurifierIn Mondosol learn some of the most effective methods on how to have clean water at home:

Boiling to have clean water at home 1.

The simplest method to purify water is to boil it for a good amount of time. High temperatures cause the bacteria and virus to dissipate, removing all impurities from the water. In doing so, chemical additions cease to exist in the water as well. However, the dead micro-organisms and impurities settle at the bottom of the water, and boiling does not aid eliminate all the impurities. You must strain the water through a microporous sieve to completely get rid of the impurities.

2. Water Purifier

A water purifier uses a multi-stage process that involves UV and UF filtration, carbon block, and modern water filtration technology that eliminates a majority of the chemicals and impurities making it the purest drinking water.

3. Reverse Osmosis

The  An RO Purifier proves to be one of the best methods of purifying water. Reverse Osmosis forces water through a semipermeable membrane and removes contaminants.TDS ControllerO. Smith RO UV Water Purifier aid retain the necessary nutrients while doing away with harmful impurities.

4. Water Chlorination

This is an older technique used usually during an emergency, wherein a mild bleach with approximately 5% chlorine is added to the water. This mixture works as an oxidant and quickly kills microorganisms, making water protected for consumption.

Distillation

Distillation is a water purification process that involves collecting the condensed water after evaporation, which ensures that water is no cost of contaminants. However, this isn’t as effective as an RO filter because it is time-consuming and eliminates minerals as well.

Iodine Addition

It is extremely powerful as it kills bacteria and viruses. Therefore, it should only be used if you don’t have access to a better method of purification like an electric water purifier.

Solar Purification 7.

An alternative to the UV filtration is solar purification which involves treating water with the ultraviolet radiation of the sun. The process involves filling a plastic bottle with water, shaking it to activate the oxygen and leaving it horizontally in the sunlight. This effectively kills bacteria and viruses present in the water, making it safe for consumption.

8. Clay Vessel Filtration

Way before people had access to an RO or UV Purifier, they used clay pots which purified muddy water, by blocking out the mud and allowing pure, potable water to pass through. This method is still used in some rural regions.

UV Radiation 9.

Water is exposed to a UV Light that kills microorganisms, thereby preventing it from breeding further. But if not coupled with an RO Filter, UV Radiation alone cannot remove impurities and heavy metals.

10. Desalination

• World Health Organization (WHO), 2015. Technical Briefing on Boil Water EXIT
• Safe Drinking Water Hotline 1-800-426-4791

Contact Us